hosts/losurdo/networking.nix

   1 { pkgs, lib, config, hostName, ... }:
   2 with builtins;
   3 let
   4   inherit (config) networking;
   5   inherit (config.security) gnupg;
   6   lanIPv4        = "192.168.1.215";
   7   lanNet         = "192.168.1.0/24";
   8   lanIPv4Gateway = "192.168.1.1";
   9 in
  10 {
  11 imports = [
  12   networking/nftables.nix
  13   networking/ssh.nix
  14   networking/wireguard/intranet.nix
  15   networking/wireguard/extranet.nix
  16   #networking/tor.nix
  17   networking/nsupdate.nix
  18   networking/wireless.nix
  19   networking/openvpn.nix
  20 ];
  21
  22 boot.initrd.network = {
  23   enable = true;
  24   flushBeforeStage2 = true;
  25   # This will automatically load the zfs password prompt on login
  26   # and kill the other prompt so boot can continue
  27   # The pkill zfs kills the zfs load-key from the console
  28   # allowing the boot to continue.
  29   postCommands = ''
  30     echo >>/root/.profile "zfs load-key ${hostName} && pkill zfs"
  31   '';
  32 };
  33
  34 /* WARNING: using ipconfig (the ip= kernel parameter) IS NOT RELIABLE:
  35    a 91.216.110.35/32 becomes a 91.216.110.35/8
  36 boot.kernelParams = map
  37   (ip: "ip=${ip.clientIP}:${ip.serverIP}:${ip.gatewayIP}:${ip.netmask}:${ip.hostname}:${ip.device}:${ip.autoconf}")
  38   [ { clientIP = netIPv4; serverIP = "";
  39       gatewayIP = networking.defaultGateway.address;
  40       netmask = "255.255.255.255";
  41       hostname = ""; device = networking.defaultGateway.interface;
  42       autoconf = "off";
  43     }
  44     { clientIP = lanIPv4; serverIP = "";
  45       gatewayIP = "";
  46       netmask = "255.255.255.0";
  47       hostname = ""; device = "enp2s0";
  48       autoconf = "off";
  49     }
  50   ];
  51 */
  52 /* DIY network config, but a right one */
  53 /*
  54 boot.initrd.preLVMCommands = ''
  55   set -x
  56
  57   # IPv4 lan
  58   ip link set enp5s0 up
  59   ip address add ${lanIPv4}/32 dev enp5s0
  60   ip route add ${lanIPv4Gateway} dev enp5s0
  61   ip route add ${lanNet} dev enp5s0 src ${lanIPv4} proto kernel
  62     # NOTE: ${lanIPv4}/24 would not work with initrd's ip, hence ${lanNet}
  63   ip route add default via ${lanIPv4Gateway} dev enp5s0
  64
  65   # IPv6 net
  66   #ip -6 address add ''${lanIPv6} dev enp5s0
  67   #ip -6 route add ''${lanIPv6Gateway} dev enp5s0
  68   #ip -6 route add default via ''${lanIPv6Gateway} dev enp5s0
  69
  70   ip -4 address
  71   ip -4 route
  72   #ip -6 address
  73   #ip -6 route
  74
  75   set +x
  76 '';
  77 */
  78 # Workaround https://github.com/NixOS/nixpkgs/issues/56822
  79 #boot.initrd.kernelModules = [ "ipv6" ];
  80
  81 # Useless without an out-of-band access, and unsecure
  82 # (though / may still be encrypted at this point).
  83 # boot.kernelParams = [ "boot.shell_on_fail" ];
  84
  85 /*
  86 # Disable IPv6 entirely until it's available
  87 boot.kernel.sysctl = {
  88   "net.ipv6.conf.enp5s0.disable_ipv6" = 1;
  89 };
  90 */
  91
  92 networking = {
  93   hostName = hostName;
  94   domain = "sourcephile.fr";
  95
  96   useDHCP = false;
  97   enableIPv6 = true;
  98   /*
  99   defaultGateway = {
 100     address = lanIPv4Gateway;
 101     interface = "enp5s0";
 102   };
 103   defaultGateway6 = {
 104     address = lanIPv6Gateway;
 105     interface = "enp5s0";
 106   };
 107   */
 108   #nameservers = [ ];
 109 };
 110
 111 networking.nftables.ruleset = ''
 112   add rule inet filter input  iifname "enp5s0" goto net2fw
 113   add rule inet filter output oifname "enp5s0" jump fw2net
 114   add rule inet filter output oifname "enp5s0" log level warn prefix "fw2net: " counter drop
 115   add rule inet filter fw2net ip daddr ${lanNet} log level info prefix "fw2net: lan: " counter accept comment "LAN"
 116   add rule inet nat postrouting oifname "enp5s0" masquerade
 117 '';
 118 boot.kernel.sysctl."net.ipv6.conf.enp5s0.addr_gen_mode" = 1;
 119 /*
 120 security.gnupg.secrets."ipv6/enp5s0/stable_secret" = {};
 121 # This is only active in stage2, the initrd will still use the MAC-based SLAAC IPv6.
 122 system.activationScripts.ipv6 = ''
 123   ${pkgs.procps}/bin/sysctl --quiet net.ipv6.conf.enp5s0.stable_secret="$(cat ${gnupg.secrets."ipv6/enp5s0/stable_secret".path})"
 124 '';
 125 */
 126 networking.interfaces.enp5s0 = {
 127   useDHCP = true;
 128   /*
 129   ipv4.addresses = [ { address = lanIPv4; prefixLength = 24; } ];
 130
 131   ipv4.routes    = [ { address = networking.defaultGateway.address; prefixLength = 32; } ];
 132   ipv6.addresses = [ { address = lanIPv6; prefixLength = 64; }
 133                      { address = "fe80::1"; prefixLength = 10; }
 134                    ];
 135   ipv6.routes    = [ { address = networking.defaultGateway6.address; prefixLength = 64; } ];
 136   */
 137 };
 138 }